← IARO Express archive
IARO Express

IARO Express 705

Thursday 19 November 2026

CAT – an update and a correction

In the last issue of IARO Express, we reported on the delivery of new trains for Vienna’s City Airport Train (CAT), which are scheduled to enter passenger service in autumn 2027.

Unfortunately, the photographs accompanying the article were incorrect and did not show the new trains being supplied by Stadler. We apologise to our readers, Vienna City Airport Train and Stadler for this error.

The correct photographs, reproduced here, show the new Class 4705 KISS double-deck electric multiple units, three of which have been ordered to replace CAT’s existing fleet.

Built by Stadler at its St Margrethen facility in Switzerland, the five-car trains have been designed specifically for passengers travelling between Wien Mitte in central Vienna and Vienna Airport.

Each train will offer approximately 300 seats, dedicated luggage storage, wide gangways, low-floor boarding areas, power sockets, USB charging facilities and free Wi-Fi. The trains will also feature modern passenger information systems providing real-time journey updates.

The new fleet is expected to enter service following the completion of infrastructure works on Vienna’s core railway line.

IARO Express is pleased to publish the correct photographs and regrets any confusion caused by the original images.

Exterior photo of the new trains

Interior photo of the new trains

All new Tyne and Wear Metro trains now in service

All 46 new Tyne and Wear Metro trains have been officially handed over for customer service, marking the final phase of the £362m project.

Metro operator Nexus, which serves Newcastle Airport, said it was the culmination of the biggest project in the history of the Tyne and Wear Metro. Stadler, the Swiss train manufacturer, formally handed over the 46^th and final new Class 555 Metro train to Nexus last month – two months ahead of an end-of-2026 target date. It marks the final stages of a project which has been transformational for many thousands of customers and has secured the long-term future of the Tyne and Wear Metro system. Now all of the new Metro trains have gone through the rigorous testing and commissioning process and can now be used to provide daily services to customers on the system.

Class 555 Metro train

In achieving the latest project milestone, Nexus has completed 90,000 individual tests across the new fleet, trained 480 employees and put the fleet through a total of 37,000 kilometres of on track testing runs.

All of the new Metro trains have been hauled to the UK across mainland Europe by rail from the Stadler factory in Switzerland - a journey of 2900km. That process began when the first new Class 555 train was delivered in February 2023. The first new train entered customer service on 18 December 2024. Since the first unit entered customer service, a new train has been handed over to Nexus on average every 15 days.

Designed following an extensive customer consultation which resulted in over 23,000 responses, the new Metro trains include linear seating, mobile charging points, climate control, 44 CCTV cameras, battery technology, and new accessibility standards, including an automatic sliding step at each set of doors to allow for seamless boarding.

The last few units in the original Metro 599 train fleet were withdrawn from service in June this year.

The interior of one of the new trains

IARO Express 639 had an earlier report.

Sources Rail Business Daily (news.railbusinessdaily.com ) and the IARO database

Better connection to Bradley International Airport

A new station at Windsor Locks, between Hartford and Springfield in Connecticut, opened last month. It will improve transportation access, support downtown development and strengthen connections to Bradley International Airport. The new station on Main Street is served by Amtrak and Hartford Line trains and marks the return of rail service to the downtown area. The station includes 160 parking spaces, electric vehicle charging stations, bicycle racks and a dedicated bus pickup and drop-off area.

The project is part of a larger $121.2 million investment that includes $46.1 million in station and roadway improvements and $75.1 million in rail infrastructure and pedestrian bridge work. The station represents a major step in Windsor Locks' ongoing downtown revitalization efforts.

The station is expected to house new development in the area. A mixed-use complex from Trinity Financial planned next door will include more than 100 apartments and commercial space. Railroad improvements connected to the project include the reconstruction and realignment of about 1.7km of Track 1 and the construction of approximately 1.35km of a new bypass Track 2. Upgraded signals, railroad crossings and train control systems will improve safety, reliability and operational flexibility. The Connecticut Department of Transportation is coordinating the work with Amtrak, which owns the rail line. Track construction remains underway, with the overall project expected to be completed in spring 2028.

Amtrak officials said the station's transportation connections will make it easier for travelers to move between rail and air travel. One of the biggest changes for travelers will be new shuttle service between the station and Bradley International Airport. Passengers arriving by train will be able to take a shuttle bus to Terminal A, with the trip expected to take about 12 minutes including intermediate stops. The buses on route 24 run every 20 minutes on weekdays and every 40 minutes on weekends. Service is scheduled to begin at 4:53 on weekdays and 6:19 on weekends.

IARO Express 371 had an earlier report.

Source NBC Connecticut (nbcconnecticut.com ) CT Transit (cttransit.com )

Dubai’s Al Maktoum Airport to get world’s largest automated people mover

A planned 50km automated people-mover (APM) system will connect nine stations across Al Maktoum International Airport (DWC).

Construction of the network is due to be completed in December 2031, ahead of the airport’s planned 2032 opening. The contract has been awarded by Dubai Aviation City Corporation to a consortium comprising Mitsubishi Heavy Industries (MHI), its Dubai-based subsidiary MHI Mobility Engineering Services (MHI-MESC), and Indian engineering giant Larsen & Toubro (L&T).

The system will have 165 automated vehicles and will connect terminals and major facilities across the airport. The network will expand as DWC develops through its various phases.

An artist’s impression of Al Maktoum International Airport (DWC), where a 50km automated people mover will connect nine stations

The APM is being developed as part of the wider expansion of Al Maktoum International Airport, which is planned to become the world’s largest airport when fully built. It is ultimately designed to handle more than 260 million passengers and 12 million tonnes of cargo annually, with the full development planned across multiple phases.

Phase 1 is scheduled to begin operations in 2032. It will include the West Terminal, Concourse 1 and an underground APM connection, and is planned to provide capacity for around 130 million passengers annually. The ultimate development will include four concourses, five runways and a 14-station APM network linking the airport’s airside buildings.

The airport’s internal people mover is one part of a much wider transport network planned around DWC. A separate Airport Express Link – the Gold Line - is planned to connect Dubai International Airport and Al Maktoum International Airport, while Etihad Rail’s future high-speed network is also expected to serve DWC. Together, the projects will create connections between Al Maktoum International, Dubai’s major population centres and the wider UAE rail network as the new airport takes on a growing share of the emirate’s aviation traffic. These will be reported on in subsequent issues of IARO Express.

Sources Construction Week Online (constructionweekonline.com ) and the IARO database

Construction starts on Manila Aquino Airport rail link

The Department of Transportation recently announced the start of construction of the Nino Aquino International Airport (NAIA) T3 Station and its connecting tunnels. The Metro Manila Subway Project (MMSP) will give the country's main gateway its first mass public transportation link.

The full acquisition of the right-of-way for the station area reflects the Department of Transportation's efforts to fast-track the construction of the NAIA T3 station and, eventually, the entire mass rail infrastructure. The entire MMSP is on track for its target completion in the last quarter of 2031.

The 2.413-km NAIA Terminal 3 Station and tunnels will employ a Japanese engineering technology known as underpinning, which will allow existing expressway piers to be supported and maintained while accommodating the subway tunnel alignment.

The station area's right-of-way has been fully secured from the Department of Public Works and Highways, Bases Conversion and Development Authority, Manila International Airport Authority, New NAIA Infra Corp. and the Pasay City government.

Once fully operational, travel time from Valenzuela City to NAIA Terminal 3 is expected to drop to around 40 minutes, down from the current one hour and 10 minutes. Financed by the Japan International Cooperation Agency, the 33-kilometer, 17-station MMSP is projected to serve around 70,000 passengers daily at the NAIA T3 station by 2035, increasing to approximately 74,000 passengers daily by 2045.

IARO Express 608 reported on completion of a light rail link to the airport.